QLU-3066 epoxy self-flowing plane coating
1. Product characteristics.
QLU-3088 adopts imported 828 resin or 128 resin, high quality color filler, solvent, BYK ( Bick ) additives, American gas company curing agent and other raw materials. It is a two-component material with high solid content and low viscosity. QLU-3088 has a series of excellent features: such as high mechanical wear resistance and adhesion, excellent chemical resistance, resistance to acid, alkali, salt liquid and petroleum products, and excellent flooring surface coating beauty and decorative properties.
2. Usage description.
(1) Uses.
General industrial plants (such as electronic plants, food plants, precision machinery plants), GMP industry plants, laboratories, shopping centers, parking lots and other ground surface coatings.
(2) Construction requirements.
Mixing: During storage, component A may have slight precipitation, mix component A well before mixing; pour component A/B into mixing barrel proportionally and mix well before construction.
Construction method: Base coat: use QLU1023 or 3001 base coat to achieve uniform film formation.
Middle coat: use QLU3078 middle coat and mix quartz sand to the required thickness.
Top coat: scrape QLU3066, mixer material on the closed medium coating, with a special knife with teeth scraping (Note: must be back to the knife).
Reference dosage: 0.7-3.0kg/m 2( two times)
Construction conditions: water content requires less than 8%, relative humidity less than 55%, rainy days or when the relative humidity of the atmosphere is higher than 85%, or the temperature is below 10 ℃, should avoid construction.
3. Caution.
Sealed storage: in a cool and ventilated place, moisture-proof and sun-proof.
Notes.
This product is a chemical, swallowing is harmful or fatal, if swallowed should immediately seek medical advice. If splashed in the eyes accidentally, flush with plenty of water and seek medical attention immediately in serious cases. Pay attention to take precautionary measures, fire and explosion prevention, and the disposal of residues should comply with the safety regulations of relevant countries or local governments.